preloaderlogo Welcome! Thanks for visiting.

Braycote 3214

Braycote 868
Castrol 3214

Braycote 3214

Perfluoroether Grease, Low Volatility

In 5 pound containers

Castrol Braycote 3214 is fully approved and qualified to MIL-PRF-32014.

Braycote 3214 Description
Castrol Braycote™ 3214 is a multi-purpose high-temperature full synthetic grease, which is approved and qualified to MILPRF- 32014. This product contains a lithium soap thickening agent formulated with a medium viscosity synthetic base oil. Special additives in combination with these key ingredients provide superior wear protection, high load carrying capacity, improved resistance to water and salt water wash out, corrosion inhibition, improved mobility at low temperatures and outstanding stability at high temperature. Castrol Braycote 3214 is recommended for use in aircraft applications with adverse conditions such as high temperature, high humidity and/or high speeds

Braycote 3214 Applications
Castrol Braycote 3214 was designed for use in aircraft applications requiring a water-resistant, high-speed, high load carrying capacity grease suitable for use in challenging conditions.
Braycote 3214 is intended for use in a variety of aircraft applications including landing gear assemblies and bearings, flight controls, flap/slat systems and gear applications where water resistance and corrosion protection are required.
Castrol Braycote 3214, like any other lithium thickened grease, is incompatible with clay and bentonite-based greases and should not be used for relubrication of existing components without confirmation of suitability for use from the component manufacturer and/or aircraft OEM.

Braycote 3214 Temperature Range
-65°F to a maximum of 347°F (-54°C to a maximum of 175°C).

Braycote 1632 Limitations
Braycote 1632 is compatible, under normal operating conditions, with conventional metals, plastics, and elastomers. It may be adversely affected by Lewis Acids, such as AlCl3, at elevated temperatures. Rubbing surfaces of aluminum, magnesium, or titanium alloys under certain conditions may react with Braycote 1632. Such systems should be thoroughly evaluated. Surfaces must be well cleaned of organic rust inhibitors prior to grease application to insure proper lubrication.

Braycote 3214 Typical Properties
Braycote 1632