QC Lubricants
CAGE CODE 9Y364
 7360 Milnor St • Philadelphia, PA 19136
(215)333-2000 • (800)-887-2436
Extension 203 or 211

We actively supply a comprehensive line of MIL-SPEC  and commercial lubricants.

 

MIL-SPECS
Products
Chemical.net
 

 

 
AnderolRoyco Lubricants

ROYCO®49

GENERAL PURPOSE, EXTREME PRESSURE GREASE

GENERAL INFORMATION:
ROYCO 49 is a smooth, buttery, gray-black mineral oil based grease using an inorganic gel thickener and microfine molybdenum disulfide that is compounded with additives to impart oxidation resistance, water washout,
and both fresh and salt-water corrosion protection.
TYPICAL PROPERTIES:

PROPERTIES
Penetration, worked
Dropping Point, °F
Oil Separation, %, 350°F/30 hrs
Evaporation, %, 350°F/22 hrs
Load Wear Index
Salt Spray Corrosion
on Bimetallic Couple
Boiling Water Immersion,
Water Washout, 100°F, 1 hr.
Copper Corrosion

 ROYCO 49
285
535
1.0
2.25
55
PASS
Shows No Corrosion
PASS
NIL
1B

APPLICATIONS:
ROYCO 49 is intended for use in applications where severe operating conditions may include temperatures as high as 400 degrees F, low to moderate speeds, high loads, extreme pressure, and a salt water or high pressure steam environment. ROYCO 49 exhibits excellent resistance to water washout.

ADVANTAGES
• Functions well at high operating temperatures
• Outstanding water washout characteristics
• Excellent rust and oxidation resistance

LIMITATIONS:
ROYCO 49 should not be used in high-speed anti-friction bearings without prior performance evaluation.

APPROVALS:
ROYCO 49 meets all requirements and is qualified against the latest revision level of MIL-SPEC: MIL-DTL-23549D,
which supersedes MIL-G-23549C.

Give us a call for information, pricing and availability. Our dedicated staff is eager to hear from you.
 

Royco and all associated logo's are registered trademarks of Anderol Inc.
 Distributed by QCLubricants, Inc. All Rights Reserved.