QC Lubricants
CAGE CODE 9Y364
 7360 Milnor St • Philadelphia, PA 19136
(215)333-2000 • (800)-887-2436
Extension 203 or 211

We actively supply a comprehensive line of MIL-SPEC  and commercial lubricants.

 

MIL-SPECS
Products
Chemical.net
 

 

 
AnderolRoyco Lubricants

ROYCO 27®

ADVANCED SYNTHETIC MULTI-PURPOSE

AIRCRAFT GREASE

GENERAL INFORMATION

ROYCO 27 is a light tan colored synthetic ester based grease with a lithium stearate thickener. Additives are provided for oxidation and corrosion resistance as well as rust protection and extreme pressure anti-wear properties.

TYPICAL PROPERTIES:

PROPERTIES

Penetration, mm
Worked
Unworked
Stability, 100,000 strokes
Evaporation, 100 deg C/22 hrs.,%
Storage Stability
Oxidation Stability, 100 hrs, 210 deg. F
Rust Prevention
Dropping Point, deg C
Oil Separation
100 deg C, 72 hrs, % wt
Load Wear Index
Low Temp. Torque, Nm, -100 F
Starting
Running 		ROYCO 27

287
275
310
1.0
No Gross Separation
2 PSI
PASS
190

2.3
37

0.38
0.03

APPLICATIONS:

ROYCO 27 is intended for use in highly loaded gears and actuators as well as instruments and high-speed bearings over temperatures from -100 to 275oF. In addition, ROYCO 27 may be used in all applications where MIL-G-3278, MIL-G-7118, MIL-G-7421, MIL-G-15793, and MIL-PRF-23827 are specified.

ADVANTAGES:

• Designed for high loads and high speed bearings • Wide operating temperature range• Rust and corrosion protection • Thermal and oxidative resistance

APPROVALS:

ROYCO 27 meets all requirements and is qualified against MILSPEC: MIL-PRF-23827C.

The synthetic oils used in ROYCO 27 may soften natural rubbers, neoprene, some types of electrical insulating compounds, and certain paints.


Call us for pricing and availability, or with any questions. Our dedicated staff is eager to hear from  you.


Royco and all associated logo's are registered trademarks of Anderol Inc.
 Distributed by QCLubricants, Inc. All Rights Reserved.