QC Lubricants
CAGE CODE 9Y364
 7360 Milnor St • Philadelphia, PA 19136
(215)333-2000 • (800)-887-2436
Extension 203 or 211

We actively supply a comprehensive line of MIL-SPEC  and commercial lubricants.

 

MIL-SPECS
Products
Chemical.net
 

 

 
AnderolRoyco Lubricants

 
ROYCO® 1MS

THREAD COMPOUND, ANTISEIZE, MOLYBDENUM
GENERAL INFORMATION:

ROYCO 1MS is a blend of lubrication grade micro fine powdered molybdenum disulfide that conforms to Mil-M-7866, and technical grade petrolatum conforming to VV-P-236. This compound is non-abrasive, highly shear and stable. It has a relatively low volatility compared to some thread compounds.
 

TYPICAL PROPERTIES:

Worked Penetration,
77°F, ASTM D-217
 		 220
Stability, FTM 791-3003 PASS


APPLICATIONS:
ROYCO 1MS is particularly suitable for use on aircraft engine spark plugs and threaded fasteners and fittings at temperatures below 800°F. At higher temperatures, ROYCO 44 should be used in lieu of ROYCO 1MS. Since this material is an electrical conductor, it is especially suited for
anti-seize applications where the thread compound will not impede the flow of an electrical current.

ADVANTAGES:
Electrical conductor
Superior anti-seize ability
Excellent shear stability
Low volatility

COMPATIBILITY:
ROYCO 1MS is an electrically conductive thread compound and should be used with discretion in or near electrical equipment. It is not a sealing compound and should not be used in oxygen systems.

APPROVALS:
ROYCO 1MS meets all requirements and is qualified to the current revision level of US MIL-SPEC: MIL-PRF-83483.

Call us for pricing and availability, or with any questions. Our dedicated staff is eager to hear from  you

Royco and all associated logo's are registered trademarks of Anderol Inc.
Distributed by QCLubricants, Inc. All Rights Reserved.