QC Lubricants
CAGE CODE 9Y364
 7360 Milnor St • Philadelphia, PA 19136
(215)333-2000 • (800)-887-2436
Extension 203 or 211

We actively supply a comprehensive line of MIL-SPEC  and commercial lubricants.

 

MIL-SPECS
Products
Chemical.net
 

 

 
AnderolRoyco Lubricants

ROYCO 308CA®

GENERAL PURPOSE LUBRICATING OIL AND PRESERVATIVE

GENERAL INFORMATION:

ROYCO 308CA is a highly refined mineral oil based lubricating oil blended with modern additives for rust and corrosion inhibition and improved water displacing characteristics.

TYPICAL PROPERTIES:

PROPERTIES

Cloud Intensity -65oF/72 hrs.
Pour Point °C -66

Flash Point COC °C

Viscosity cSt
@ 40°C
@ -40°C
@ -54°C

Copper Corrosion, 3 hr/100°C

Precipitation Number

Galvanic Corrosion

Rust Protection 110°F/168 hrs.

Film Characteristics even coat

Remove ability

Water Displacement

Shell 4 Ball Wear mm2

Evaporation % wt. 100oC/22 hrs.

Specific Gravity 60°F

Oxidation - Corrosion Stability 250°F/168hrs.
Copper mg/cm2
Aluminum mg/cm2
Steel mg/cm2
Magnesium mg/cm2
Cadmium mg/cm2
Viscosity Change %
T.A.N. Change
 

 ROYCO 308CA

PASS


150


11.3
4,575
49,000

1A

0.00

PASS

PASS

PASS

PASS

PASS

0.80

10.5

0.889


0.02
0.10
0.01
0.10
0.01
9.1
0.10

APPLICATIONS

ROYCO 308CA was developed for the lubrication and protection against corrosion of small arms and automatic weapons however, it may be used as a general-purpose lubricant in all applications where water displacement, water resistance, corrosion protection and/or low temperature performance is required. ROYCO 308CA is an excellent lubricant for locks, hinges, electric motors, chains, and fishing, hunting and camping equipment. For small engine storage, pour slowly into the throat of the carburetor until the engine stalls. The engine is now preserved internally and assures that no gums or corrosion will develop during storage and that valves will not stick during start-up.

ADVANTAGES
• Excellent rust and corrosion resistance • Outstanding water resistance

APPROVALS

ROYCO 308CA meets all requirements and is qualified to Federal Specification: MIL-PRF-32033, which supersedes and replaces VV-L-800C.

COMPATABILITY

ROYCO 308CA is not recommended as a lubricant at temperatures below -70oF. For operation at extreme low temperatures ROYCO 363 is advised.


Call us for pricing and availability, or with any questions. Our dedicated staff is eager to hear from  you.


Royco and all associated logo's are registered trademarks of Anderol Inc.
 Distributed by QCLubricants, Inc. All Rights Reserved.