Aeroshell Oil Turbine 560 Product Description:
 Aeroshell Oil Turbine 560 is a new third generation “low coking” 5 centistoke synthetic lubricating oil designed specifically for gas turbine engines. Aeroshell 560 is blended from high quality “hindered” esters to produce exceptional thermal stability needed in today’s advanced engines. Aeroshell 560 incorporates advanced additive technology and a fine balance of additives to resist the high temperatures generated by turbine engines. These carefully selected components result in a product which greatly reduces the deposits caused by high temperature conditions and improves overall engine performance. Always check with an expert for the exact recommendation for each application.
Aeroshell Oil 560 corresponds to Mil Spec MIL-PRF-23699 Class HTS

Aeroshell 560 Applications:

• Jet aircraft turbine engines
  
• Helicopter turbine engines
  
• Helicopter gear boxes and transmissions
  
• Industrial gas turbine engines
  
• Constant speed drives

Aeroshell 560 Features/Benefits:

• Keeps engines cleaner compared to engines using Type II fluids
  
• Provides improved load carrying capacity
  
• Prolongs bearing life

Aeroshell 560 Approvals and Recommendations:

• MIL-PRF-23699 Classification HTS
  
• DERD 2499 OX-27
  
• DEF STAN 91-101
  
• Allied Signal – TFE 731, TPE 331, APUs (majority of models)
  
• Allison – EMS-53, 250 Series
  
• BMW/Rolls-Royce – BR710
  
• General Electric – D-50 TF1, GE 90, CF6 (all models) CJ610, CF700, CT58, CF34
  
• Pratt & Whitney – 521C Type II, JT3D, JT8D, JT9D, PW4000 Series, PT6T, PT6A (some models only) PW100, JT15D, PW200, Series, PW300 Series, PW500 Series, PW901A APU
  
• Rolls-Royce – Trent, RB211-22B, -524, -535, Spey, Tay, RB183, Adour
  
• Textron Lycoming - LTS 101, LTP 101
  
• Turbomecca – Arriel, Makila, RTM 322, TM 319, TM 333, TP 319, various models of Astazou and Artouste engines

Typical Properties of AeroShell Oil Turbine 560
Aeroshell 560 Product Code		60074
Aeroshell 560 Property	REQUIREMENTS	TYPICALS
Aeroshell 560 Oil Type	Synthetic ester	Synthetic ester
Aeroshell 560 Viscosity
@ 100 ºC, cSt	4.9-5.4	5.26
@ 40 ºC, cSt	23.0 min	28.3
@ -40.0 ºC, cSt	13,000 max	10,060
Aeroshell 560 Flash Point, ºC	246 min	260
Aeroshell 560 Pour Point, ºC	-54 max	<-54
Aeroshell 560 Total Acidity – Mg KOH/g	1 max	0.14
Aeroshell 560 Evaporation Loss 6.5 hrs @ 204ºC, %m	10.0 max	2.4
Aeroshell 560 Foaming	Must pass	Pass
Aeroshell 560 Swelling of Standard Synthetic Rubber
SAE-AMS 3217/1 72 hrs @ 70 ºC swell-%	5 to 25	13.8
SAE-AMS 3217/4, 72 hrs @ 204 ºC swell-%	5 to 25	12
Standard Silicone Rubber 96 hrs @ 121 ºC swell-%	5 to 25	7.5
Terminal Stability/Corrosivity  90 hrs @ 274 ºC
Metal weight change –mg/cm2	4 max	-3.5
Viscosity change - %	5 max	2.9
Aeroshell 560 Total Acid Number Change – mg KOH/g	6 max	-0.8
Corrosion and Oxidation Stability 72 hrs @ 175 ºC 72 hrs @ 204 ºC 72 hrs @ 218 ºC	Must pass Must pass Must pass	Pass Pass Pass
Aeroshell 560 Ryder Gear Test, Relative Rating- Hercolube A	102 min	126
Bearing Test Rig Type 1 1/2 Conditions
Overall deposit demerit rating	80 max	6
Viscosity changer @ 37.8 ºC -%	-5 to +30	20.9
Total Acid Number Change-mg KOH/g Filter Deposits - g	2 max 3 max	1.0 0.5
Aeroshell 560 Sonic shear stability Viscosity Change @ 40 ºC-%	4 max	Nil
Aeroshell 560 Trace Metal Content	Must pass	Pass
Aeroshell 560 Sediment – mg/1	10 max	2.6
Aeroshell 560 Ash – mg 1	1 max	0.05

Handling & Safety Information For information on the safe handling and use of this product, refer to its Material Safety Data Sheet

For more information on Aeroshell Oil Turbine 560, or any Aeroshell product, please give us a call. Our dedicated staff is eager to hear from you.