QC Lubricants
CAGE CODE 9Y364
 7360 Milnor St • Philadelphia, PA 19136
(215) 333-4187 Direct Line

Toll Free With Extension: (800) 887-2436
For Sales Manager: Dial Extension 203 for Stan Jakubowski
For Sales Assistance: Dial Extension 211 for Lu Ann Quinn


Home Request for Quote About Us

We actively supply a comprehensive line of MIL-SPEC  and commercial lubricants.

 

Back to Tectyl Main Page
Mil-Specs
Products
MSDS
Product Shelf Life
PDS and Other Docs
Chemical.net

ExxonMobile
Castrol
Shell
Valvoline
Anderol
LHB Industries
 

      Tectyl


  Tectyl 846

TECTYL® 846, Class I  CORROSION PREVENTATIVE
MEETS MILITARY SPECIFICATION MIL-PRF-16173E

If you need  additional information on Tectyl 846, or it's Military Specification MIL-PRF-16173E, please give us a call. Our dedicated team is eager to help.

TECTYL® 846, Class I

TECTYL 846, Class I is a solvent cutback, water displacing corrosion preventive compound. The dry film is firm, amber, transparent, and non-tacky. TECTYL 846, Class I is approved under Military Specifications MIL-PRF-16173E, Grade 4, for Class I.
 

Tectyl 846 Laboratory Data Tectyl 846 Typical Properties
Tectyl 846 Flash, PMCC*, Minimum 106°F
Tectyl 846 Density, Weight/Gallon @ 77°F (25°C) 7.3 ± 0.1 lbs./gallon
Tectyl 846 Specific Gravity @ 60°F (15.6°C) 0.87
Tectyl 846 Recommended Dry Film Thickness over Metal Profile 1.0 mil
Tectyl 846 Theoretical Coverage @ Recommended DFT 818 sq. ft./gallon
Tectyl 846 Non-Volatile % by Weight 57 ± 3
Tectyl 846 Non-Volatile % by Volume 51 ± 1
Tectyl 846 Volatile Organic Content (VOC), Maximum 3.40 lbs./gallon
Tectyl 846 Approximate Dry to Touch Time @ 77°F (25°C) 4 hours
Cure Time 24 hours
Resistance to Flow per MIL-C-16173E Pass

 

Tectyl 846 Accelerated Corrosion Tests:
5% Salt Spray (Hours) ASTM** B-117 @ Recommended DFT (2x4x1/8 in. Polished Steel Panels) 1920
100% Relative Humidity (Hours) ASTM D-1748 @ Recommended DFT (2x4x1/8 in. Polished Steel Panels) 1000

Tectyl 846 Surface Preparation
The maximum performance of TECTYL 846, Class I can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. Daubert Chemical Company recommends that the metal substrate temperature be 50-95°F (10- 35°C) at the time of product application.

Tectyl 846 Storage
Store TECTYL 846, Class I at temperatures between 50-95°F (10-35°C). Mild agitation is recommended prior to use.

Tectyl 846 Application
 TECTYL 846, Class I is formulated to be used as supplied.Ensure uniform consistency prior to use. Continued stirring is generally not required. If the product thickens due to cold storage or loss of solvent during use, contact Daubert Chemical Company.DO NOT THIN TECTYL 846, Class I. Incorrect thinning will affect film build, dry time and product performance. Daubert Chemical Company recommends that the ambient and product temperature be 50 - 95°F (10 - 35°C) at time of application. TECTYL 846, Class I can be spray or dip applied.

Tectyl 846 Storage
 Store TECTYL 846, Class I at temperatures between 50-95°F (10-35°C). Mild agitation is recommended prior to use.
 
Tectyl 846 Caution
Adequate ventilation is required for cure and to ensure against formation of a combustible liquid.THE PARTIALLY CURED FILM SHOULD NOT BE EXPOSED TO IGNITION SOURCES SUCH AS FLARES, FLAMES, SPARKS,EXCESSIVEHEAT,OR TORCHES. Refer to the Material Safety Data Sheet for additional handling and first aid information.

Tectyl 846 Removal
TECTYL 846, Class I can be removed with TECTYL HPS solventborne thinner, vapor degreasing, hot alkaline wash, or low pressure steam. TECTYL 846, Class I can be removed from fabrics by normal dry cleaning procedures.Avoid the use of chlorinated or highly aromatic solvents when removing from painted surfaces, as these solvents may adversely affect paint.

Back to Tectyl Main Page