 |
|
 |
Brayco Micronic 883
Hydraulic Fluid, Rust Inhibited, Fire Resistant
Synthetic Hydrocarbon Base
Castrol Brayco®
Micronic 883
Hydraulic Fluid, Low Temperature Fire Resistant,
Synthetic Hydroc
QCLubricants Carries Brayco Micronic 883 in Drums Only.
Brayco®
Micronic 883 is a rust-inhibited fire resistant synthetic ISO viscosity
Grade 15 hydraulic fluid for aircraft, ordnance and industrial
use. It
contains no viscosity index improvers
and therefore, unlike conventional hydraulic fluids, it is not
subject to polymeric breakdown. This product is compatible
with MIL-PRF-5606H and MIL-PRF-6083F fluids in all proportions.
Brayco®
Micronic 883 is available in two types. Type I is undyed for use in
ground equipment, such as tanks.
Type II is dyed red for use in
aerospace test stands and not intended for ground equipment
use.
Temperature Range:
-45ºC to 204ºC (-50ºF
to 400ºF).
Uses:
Brayco®
Micronic 883 is primarily designed as a fire
resistant hydraulic fluid with superior
corrosion resistance.
MIL-PRF-46170
is intended for use as a direct replacement for MIL-PRF-6083.
Shelf Life:
Brayco®
Micronic 883 has a maximum recommended shelf life of
6 years from date of manufacture.
This
shelf life assumes that the product is
stored in its original unopened packaging
in ambient temperature conditions.
Specification:
Brayco®
Micronic 883 (straw) meets and is qualified under military specification
MIL-PRF-46170D, Type I.
Brayco®
Micronic 883 (red) meets the
requirements of military specification
MIL-PRF-46170C,
Type II (red).
Type I fluid is identified
by NATO Code Number
H-544.
CASTROL BRAYCO MICRONIC 883
TYPICAL PROPERTIES:
|
TEST METHOD
|
DESCRIPTION
|
SPECIFICATION
REQUIREMENTS
|
RESULT
|
|
D 287
|
API Gravity, degrees
|
Report
|
35
|
|
Table 3
|
Specific Gravity @
16/16ºC (60/60ºF)
|
Report
|
0.85
|
|
Table 8
|
Pounds per
Gallon @ 16ºC (60ºF)
|
--
|
7.1
|
|
D
445
|
Kinematic
Viscosity, cSt
@ 204.4ºC (400ºF)
@ 100ºC (212ºF)
@ 40ºC (104ºF)
@ -40ºC (-40ºF)
@ -54ºC (-65ºF)
|
--
3.4 Minimum
19.5 Maximum
2600 Maximum
Report
|
1.15
3.7
15.6
2420
14,650
|
|
D 92
|
Flash Point, COC, ºC Type II
|
204 Minimum
|
218
|
|
D 92
|
Fire Point, COC, ºC (ºF)
|
246 (475) Minimum
|
252 (485)
|
|
E 659
|
Auto-ignition Point, ºC
|
343 Minimum
|
350
|
|
D 97
|
Pour Point, ºC (ºF)
|
-54 (-65) Maximum
|
-60 (-75)
|
|
D 2273
|
Trace Sediment, ml
|
0.005 Maximum
|
0.001
|
|
D 664
|
Acid Number, mgKOH/g
|
0.20 Maximum
|
0.05
|
|
D 1744
|
Water (Karl
Fischer), %
|
0.05 Maximum
|
0.02
|
|
FTM 3458
|
Low Temperature Stability,72
hrs @ -40ºC (-40ºF)
|
Pass
|
Pass
|
|
D 1748
|
Rust Prevention, Polished/Sandblasted
Panels
100
hrs @ 100% humidity
|
Pass
Pass
|
Pass
Pass
|
|
FTM 3603
|
Rubber Swell, "L" Rubber, %
|
15 – 25
|
17
|
|
Spec 4.3.3.6
|
Water Sensitivity
|
90% Minimum
|
Pass
|
|
FTM 6052
|
High Temperature Pressure Spray Ignition
|
Pass
|
Pass
|
|
D 5306
|
Flame Propagation, cm/s
|
0.30 Maximum
|
0.17
|
|
791-3009
|
Solid Particle Contamination,
Autocount
Number of Particles per 100 mL
5
-
25
microns
26 - 50 microns
51 - 100 microns
100 + microns
|
10,000 Maximum
250 Maximum
50
Maximum
10
Maximum
|
4000
36
4
1
|
|
D 2270 |
Viscosity Index |
-- |
126 |
|
E-1269 |
Specific Heat by DSC, J/g.ºK
@
70ºC
@ 100ºC
@ 130ºC
@ 160ºC
|
|
2.262
2.364
2.469
2.571
|
CASTROL
BRAYCO MICRONIC 883
TYPICAL PROPERTIES:
|
TEST METHOD
|
DESCRIPTION
|
SPECIFICATION
REQUIREMENTS
|
RESULT
|
|
D 287
|
API Gravity, degrees
|
Report
|
35
|
|
Table 3
|
Specific Gravity @ 16/16ºC (60/60ºF)
|
Report
|
0.85
|
|
Table 8
|
Pounds per
Gallon @ 16ºC (60ºF)
|
--
|
7.1
|
|
D 445
|
Kinematic Viscosity, cSt
@ 204.4ºC (400ºF)
@ 100ºC (212ºF)
@ 40ºC (104ºF)
@ -40ºC (-40ºF)
@ -54ºC (-65ºF)
|
--
3.4 Minimum
19.5 Maximum
2600 Maximum
Report
|
1.15
3.7
15.6
2420
14,650
|
|
D 92
|
Flash Point, COC, ºC Type II
|
204 Minimum
|
218
|
|
D 92
|
Fire Point, COC, ºC (ºF)
|
246 (475) Minimum
|
252 (485)
|
|
E 659
|
Auto-ignition Point, ºC
|
343 Minimum
|
350
|
|
D 97
|
Pour Point, ºC (ºF)
|
-54 (-65) Maximum
|
-60 (-75)
|
|
D 2273
|
Trace Sediment, ml
|
0.005 Maximum
|
0.001
|
|
D 664
|
Acid Number, mgKOH/g
|
0.20 Maximum
|
0.05
|
|
D 1744
|
Water (Karl
Fischer), %
|
0.05 Maximum
|
0.02
|
|
FTM 3458
|
Low Temperature Stability,
72 hrs @ -40ºC (-40ºF)
|
Pass
|
Pass
|
|
D 1748
|
Rust Prevention, Polished/Sandblasted
Panels
100
hrs @ 100% humidity
|
Pass
Pass
|
Pass
Pass
|
|
FTM 3603
|
Rubber Swell, "L" Rubber, %
|
15 – 25
|
17
|
|
Spec 4.3.3.6
|
Water Sensitivity
|
90% Minimum
|
Pass
|
|
FTM 6052
|
High Temperature Pressure Spray Ignition
|
Pass
|
Pass
|
|
D 5306
|
Flame Propagation, cm/s
|
0.30 Maximum
|
0.17
|
|
791-3009
|
Solid Particle Contamination,
Autocount
Number of Particles per 100 mL
5 -
25 microns
26 - 50 microns
51 - 100 microns
100 + microns
|
10,000 Maximum
250 Maximum
50 Maximum
10 Maximum
|
4000
36
4
1
|
|
D 2270
|
Viscosity Index
|
--
|
126
|
|
E-1269
|
Specific Heat by DSC, J/g.ºK
@ 70ºC
@ 100ºC
@ 130ºC
@ 160ºC
|
|
2.262
2.364
2.469
2.571
|
As always, with Brayco 882, or any
product you are seeking, please call us with any questions or concerns. Our
dedicated staff is eager to hear from you.
|
