Solid Film Lubricants

ExxonMobile
Castrol
Shell
Valvoline
Anderol
LHB Industries

Solid Film Lubricants, Colloidal Graphite & Moly Dispersions from QCLubricants

Solid Film Lubricants, Colloidal Graphite & Moly Dispersions

Most design engineering problems are solved by using engineered coating technologies. In many of these applications, Solid Film Lubricants, Colloidal Graphite & Moly Dispersions provide performance enhancement when dealing with corrosion, wear, galling, seizing, thermal stability, friction and chemical resistance. Many engineered coatings are used whenever conventional wet lubricants cannot or should not be used.

See the table Below for our Solid Film Lubricants, Colloidal Graphite & Moly Dispersions.

We carry Everlube products including but not limited to Lubri-Bond, Perma Slik, and Perma Slik GLF.

If you do not see what you are looking for, or have a question, give us a call. You will be happy with our knowledge and enthusiasm.

MIL-PRF-9000J (SH) MIL SYM 9250 and commercial	Chevron Lubricants	Multi-purpose Greases
MIL-L-23398 Type I - Bulk Type II - Aero	Perma-Slik G Lubri-Bond	Intended to reduce wear and prevent seizing, corrosion and galling, the lubricant can be applied by dipping, brushing or spraying.
MIL-L-24131	DAG 156	Intended for use with metal parts having limited clearance in applications where control of impurities is required.
MIL-L-24478	Molybdenum Disulfide in Isopropanol	Intended for use with metal parts having limited clearances and in applications where control of impurities is required.
MIL-L-46010 Type II	Ecoalube 642	Thermally cured, MoS₂ based solid film lubricant with a high molecular weight epoxy binder system.
MIL-L-46010E Type I	Everlube 620C	Thermally cured MoS₂ based solid film lubricant with an organic binder system.
MIL-PRF-46010G	Everlube 9002	Low VOC MoS₂ based solid film lubricant with a high molecular weight epoxy border system.
MIL-PRF-46147C Type I Form 1 - Bulk Type I Form 2 - Aero	Perma-Slik G	Lubricant solid film heat cured Type I Form 2 : aerosol Type I Form 1: bulk. Provide both lubrication and corrosion protection.
MIL-PRF-46147D Type I Form 1 - Bulk Type I Form 2 - Aero	Perma-Slik GLF	Lead free version of MIL-PRF-46147C.


QC Lubricants CAGE CODE 9Y364 7360 Milnor St • Philadelphia, PA 19136 (800)-887-2436 x203, Stan Jakubowski, Sales; x211, Lu Ann Quinn, Sales Manager• (215)333-4187 (Direct)

	We actively supply a comprehensive line of MIL-SPEC and commercial lubricants.