Xiameter PMX 200 Silicone Fluid 2CS
XIAMETER PMX-200 SILICONE FLUID 2CS
XIAMETER PMX-200 SILICONE FLUID 2CS Applications:
• Industrial applications such as glass vial and lens coatings, household
product ingredients, mechanical fluids, penetrating oil ingredients,
surface active agents, coatings, electrical insulating fluids and polish
ingredients
• Personal care products such as antiperspirants, deodorants, hair sprays,
cleansing creams, skin creams, lotions, bath oils, suntan products, nail
polishes
XIAMETER PMX-200 SILICONE FLUID 2CS Description:
XIAMETER PMX-200 Silicone Fluid is a polydimethylsiloxane
fluid commonly used as a base fluid in personal care products due to its
excellent spreading and unique volatility characteristics. It is clear,
tasteless, essentially odorless and non-greasy. Unlike other volatile
carriers used in the personal care industry, this volatile silicone fluid
does not cool the skin when it evaporates, a consequence of its unusually
low heat of vaporization.
XIAMETERPMX-200 Silicone Fluid, 0.65 cSt, is a
volatile fluid with an appreciable vapor pressure at ambient temperature.
Commercial bulk-polymerized dimethyl silicone fluids, such
as XIAMETER PMX-200 Silicone Fluids, typically contain trace amounts of
impurities.
XIAMETER PMX-200 SILICONE
FLUID 2CS Features:
• Good dielectric properties
• High water repellency
• High shearability without breakdown
• High compressibility
• High spreadability
• Low surface tension
• Low fire hazard and reactivity
• Low vapor pressure
• Good heat stability
• Good leveling and easy rubout
• Essentially odorless and nontoxic
• Soluble in a wide range of solvents
• Volatile carrier
• Compatible with a wide range of cosmetic ingredients
XIAMETER PMX-200 SILICONE
FLUID 2CS Benefits:
For Industrial Applications:
• Little change in physical properties over a wide temperature span – a
relatively flat viscosity-temperature slope, and serviceability from -40°C
up to 200°C
• Low surface tension – readily wets clean surfaces to impart water
repellency and release characteristics
For personal care:
• Soft feel and subtle skin lubricity
• Excellent spreading
• Leaves no residue or buildup
• Transient effect
• Nongreasy feel
XIAMETER PMX-200 SILICONE FLUID 2CS Composition:
• Polydimethylsiloxane fluid
• Chemical composition (CH3)3SiO[SiO(CH3)2]nSi(CH3)3 XIAMETER
PMX-200
How to Use XIAMETER PMX-200
SILICONE FLUID 2CS:
XIAMETER PMX-200 Silicone Fluid may be used alone or
blended with other cosmetic fluids to provide a fluid base for a variety
of cosmetic ingredients. It feature good solubility in most anhydrous
alcohols and in many solvents used in cosmetics.
XIAMETER PMX-200 SILICONE FLUID 2CS
Usable Life and Storage:
When stored at or below 25°C (77°F) in the original unopened containers,
this product has a usable life ranging from 30 to 60 months from the date
of production depending on viscosity.
LIMITATIONS This product is neither tested nor represented as suitable for
medical or pharmaceutical uses. Not intended for human injection. Not
intended for food use.
Use caution when handling volatile fluids at temperatures
with 10°C of the quoted flash point.
XIAMETER PMX-200 Silicone Fluid with viscosities below 5
cSt are flammable. Keep away from heat, sparks, open flames and other
sources of ignition. Keep container tightly closed.
At elevated temperatures, XIAMETER PMX-200 Silicone Fluids
are sensitive to contamination by strong acids, bases, some metallic
compounds and oxidizing agents. These contaminants may cause an
accelerated rate of volatile byproduct formation. Oxidizing agents can
also cause an increase in fluid viscosity. When these conditions may
exist, it is recommended that the flash point of the fluids be checked
periodically to monitor operational safety. Also, ignitable conditions may
exist if the fluid is giving off smoke.
