QC Lubricants carries Molykote 33 in 5.3 oz tubes and 40 lb pails.

Molykote 33 Medium Lubricant Uses:
Molykote 33 Bearing Grease is used to lubricate ball bearings operating under light to moderate loads. This can be used for:
• Freezer cart casters and cold room conveyor equipment
• Utility disconnect switch contacts
• Plastic electric clock motors
• Maximum-demand meters, power-factor meters, watt-hour meters
• Windshield wiper motor gears
• Photographic, optical and surveying equipment
• Oscillographs, geophysical and light, low-torque instruments
• Starter clutch drives

Molykote 33 Special Characteristics:
• Resistance to oxidation, moisture and corrosive atmospheres
• Inertness
• Good shear stability
• Wide service temperature range: 33 Extreme Low Temperature Grease:
 -100 to 400°F (-73 to 204°C) 41
 • Compatible with many plastics

Molykote 33 Composition:
• Lithium soap
• Phenylmethyl silicone oil

Molykote 33 grease does not soften or affect most plastics.
Molykote 33 grease is used to lubricate plastic gears, bearings and cams, as well as metal and rubber parts. Because of low torque requirements, Molykote 33 Extreme Low Temperature Bearing Grease is especially effective in equipment that must start in extreme cold.

Molykote 33 Oxidation Resistance:
Molykote 33 Bearing Grease is recommended for use in units that must remain operable when subjected not only to low and high operating temperatures, but also to severe weathering and oxidation.

PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED ON THIS WEBSITE. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER.